High-Pressure Water Systems Safety Program
$25.00
High Pressure Water Systems Safety Program
Table of Contents
- Scope
- Purpose
- Related documents
- Definitions
- General principles
- Personal protective clothing
- Head protection
- Eye protection
- Body protection
- Hand protection
- Foot protection
- Hearing protection
- Respiratory protection
- Training
- Refresher training
- Operational procedure
- Planning
- Checklist
- System control
- Work areas
- Hook-up
- Hoses
- Fittings
- Nozzles
- Pre-flushing
- Electrical equipment
- Jetting operation
- System pressurization
- Reaction force
- Hand gun operations
- Lancing and pipe cleaning
- Work stoppage
- Incidents and accidents
- Communication
- Inspection care and maintenance
- General
- Maintenance
- Pump unit
- Filters and strainers
- Hose assemblies
- Re-end hose assemblies
- Servicing
- Repairs
- Tools
- Compatibility
- Maintenance record
- Permanent cleaning areas
Description
High-Pressure Water Systems Safety Program
Chapter Section
This Guide Manual provides guidance for the operation and maintenance of water jetting equipment. It describes methods for eliminating or reducing hazards and risks associated with water jetting.
This Guide Manual only provides guidance for:
- High-pressure water jetting systems are pressurized by positive displacement pumps with an output capability greater than 400 bar litres/min.
- High-pressure water jetting operations are carried out at pressures above 200 bar and includes jetting operations involving the use of additives and abrasives.
- Water jetting operations below 200 bar where there is a foreseeable risk of injury to operators or other persons.
It shall be Your Company Name’s responsibility to ensure all contractors employed for the purpose of high-pressure water jetting are made aware of these guidelines. It will be the responsibility of the contractors to ensure these procedures are strictly adhered to at all times.
