SAME DAY TURNAROUND! 

844.674.2411      E-mail: info@safetymanualosha.com
0
  • No products in the cart.
Total:$0.00

01 Jun

Posted at 10:39h in General Safety, OSHA, OSHA Safety, OSHA Training, Safety, Safety Manual, Safety Talk, Safety Toolbox Talks, Safety Toolbox Topics, Safety Topics, Tailgate Safety, Tool Box Talk, Toolbox Talk Topics, Toolbox Talks, Toolbox Topics
0 Likes

Everyone Is Responsible For Safety Safety is everyone's responsibility! As an employee, you should: Learn to work safely and take all rules seriously. Recognize hazards and avoid them. Report all accidents, injuries and illness to your supervisor immediately. Inspect tools before use to avoid injury. Wear all assigned personal protective equipment. On the other hand, it is management's responsibility to: Provide a safe and healthy workplace. Provide personal protective equipment. Train employees in safe procedures and in how to identify hazards. Everyone must be aware of potential hazards on the job: Poor housekeeping results in slips, trips and falls. Electricity can cause...

31 May

Posted at 10:28h in OSHA, OSHA Safety, OSHA Training, Safety, Safety Manual, Safety Talk, Safety Toolbox Talks, Safety Toolbox Topics, Safety Topics, Tailgate Safety, Tool Box Talk, Toolbox Talk Topics, Toolbox Talks, Toolbox Topics
0 Likes

Ventilation - An Important Aspect Of Welding Safety - Without proper ventilation, the fumes produced in a welding operation can be hazardous to the welder or workers in the near vicinity. Reducing the exposure to fumes through an effective local exhaust or area ventilation system is the first line of defense in preventing discomfort or illnesses from toxic welding fumes. Respirators are another means of reducing exposure. This personal protective equipment should be considered a temporary process until more appropriate measures to control the exposure are in place. However, when the level of the exposure cannot be entirely eliminated by an exhaust ventilation...

30 May

Posted at 09:41h in OSHA, OSHA Safety, OSHA Training, Safety, Safety Manual, Safety Talk, Safety Toolbox Talks, Safety Toolbox Topics, Safety Topics, Tailgate Safety, Tool Box Talk, Toolbox Talk Topics, Toolbox Talks, Toolbox Topics
1 Like

Metal Polishing Metal polishing cleans, brightens, and restores solid or plated items made of gold, silver, stainless steel, brass, copper, aluminum, nickel, chrome, or other metals and alloys. Achieving a smooth and shiny finish requires tools like fixed, tabletop, or hand-held grinders, polishers and buffers. Solvents, acids, and various abrasive materials are used to degrease, clean, buff, and polish metals. Metal polishing can create a variety of hazards including chemical exposure, entrapment/entanglement, noise exposure, and ergonomics. For protection, workers should follow safety precautions and use personal protective equipment (PPE). Gloves, safety goggles, and face shields provide protection for the hands and eyes....

28 May

Posted at 12:21h in General Safety, OSHA, OSHA Safety, OSHA Training, Safety, Safety Manual, Safety Talk, Safety Toolbox Talks, Safety Toolbox Topics, Safety Topics, Tailgate Safety, Tool Box Talk, Toolbox Talk Topics, Toolbox Talks, Toolbox Topics
2 Likes

Common Sense And Accident Prevention Generally speaking, we are not born with common sense, we acquire it throughout life. Actually, common sense is really common experience--we learn about life from others' experiences as well as our own. Awareness of your environment, self-preservation and concern for your fellow workers are all factors in good common sense. Contrary to popular opinion, all workers can prevent themselves from getting hurt. The easy way to avoid pain is to observe how others have taken risks and been injured, rather than learning the hard way--from your own injury. That's common sense! The experts say at least 80%...

27 May

Posted at 12:30h in General Safety, OSHA, OSHA Safety, OSHA Training, Safety, Safety Manual, Safety Talk, Safety Toolbox Talks, Safety Toolbox Topics, Safety Topics, Tailgate Safety, Tool Box Talk, Toolbox Talk Topics, Toolbox Talks, Toolbox Topics
0 Likes

Stairs And Walkways Stairs and walkways in all businesses can be the cause of injury accidents. These passageways do not typically get the maintenance they need since they are "only" access ways and not production areas. Here are ten safety tips to help eliminate exposures at your company. Always keep one hand free to use the handrails, both up and down the stairways. Keep all stairs and walkways clear of debris and potentially slippery substances such as; ice, snow, water, oil, or grease. Keep passageways free of tools, equipment and other materials. Always practice good housekeeping in these non-production areas. When...

26 May

Posted at 09:13h in OSHA, OSHA Safety, OSHA Training, Safety, Safety Manual, Safety Talk, Safety Toolbox Talks, Safety Toolbox Topics, Safety Topics, Tailgate Safety, Tool Box Talk, Toolbox Talk Topics, Toolbox Talks, Toolbox Topics
0 Likes

Safety With Pneumatic Tools Pneumatic tools present many of the same hazards as their electrically powered counterparts, plus hazards you may not have considered. Here are things to remember when using air tools: Air pressure: Electrical tools are powered from a source that provides a well-regulated standard current. However, with air powered tools, air may be delivered at varying pressures and flows. If the pressure/flow exceeds the manufacturer's rating, the tool itself could over-speed, delivering too much torque or other excessive force. This is hazardous due to the increased possibility of tool or workpiece breakage. Inadequate pressure or flow could also result...

25 May

Posted at 08:44h in OSHA, OSHA Safety, OSHA Training, Safety, Safety Manual, Safety Talk, Safety Toolbox Talks, Safety Toolbox Topics, Safety Topics, Tailgate Safety, Tool Box Talk, Toolbox Talk Topics, Toolbox Talks, Toolbox Topics
0 Likes

Hard Hats Your head is the most important part of your body. It contains the matter that controls your ability to think, speak, and move. So, it’s head from injury on the job. Wearing your hard hat is the first line of defense against head injury. A hard hat is meant to protect your head from the impact of falling material and accidental bumping. The hat’s suspension components act as a shock absorber and are designed to absorb or deflect a blow and distribute the impact over a large area. Even if the hat dents or shatters, it can still take some force...

24 May

Posted at 08:48h in OSHA, OSHA Safety, OSHA Training, Safety, Safety Manual, Safety Talk, Safety Toolbox Talks, Safety Toolbox Topics, Safety Topics, Tailgate Safety, Tool Box Talk, Toolbox Talk Topics, Toolbox Talks, Toolbox Topics
1 Like

Floor Buffer Safety Floor buffer machines come in many styles and power levels from the standard electric stick model to battery and propane - powered walk-behinds and ride-ons. They use different pad types and abrasive factors to clean, wax, buff, and strip hard surface floors. Because floor maintenance involves using powered machinery and concentrated chemicals, it is important to keep safety in mind. Get training and read the manufacturer’s instructions for your floor machine. Read the safety data sheets (SDS) for all floor maintenance chemicals and get training on the use and proper mix ratios. Because these chemicals are sold in concentrated...

23 May

Posted at 11:04h in OSHA, OSHA Safety, OSHA Training, Safety, Safety Manual, Safety Talk, Safety Toolbox Talks, Safety Toolbox Topics, Safety Topics, Tailgate Safety, Tool Box Talk, Toolbox Talk Topics, Toolbox Talks, Toolbox Topics
0 Likes

Machine Guards If a machine has a part, function or process, which can cause injury, it needs a safeguard. Guards are installed on machinery to protect you and others from injury. This means that when a machine is in operation, its guards must be in place. A guard must never be bypassed or removed during use. If a guard is removed for machine cleaning or repairing, it must be put back into place before reuse or storage. Before beginning any work on a machine, check its moving parts to make sure that all guards are properly functioning and securely in place. Checking...

22 May

Posted at 10:19h in General Safety, OSHA, OSHA Safety, OSHA Training, Safety, Safety Manual, Safety Talk, Safety Toolbox Talks, Safety Toolbox Topics, Safety Topics, Tailgate Safety, Tool Box Talk, Toolbox Talk Topics, Toolbox Talks, Toolbox Topics
0 Likes

Office Safety - Avoid Common Office Injuries It is generally accepted that in heavy industry, you'll find dangerous work environments that expose employees to potential injury. But fewer companies recognize the potential risks found in everyday office environments. Office work, too, can lead to injuries if appropriate safe work practices are not followed. Learn to avoid these common hazards: Musculoskeletal strains and sprains associated with material handling: If you must walk and carry an object, make sure the object is carried in a way that avoids blocking your vision. Never lift objects that are too heavy to handle comfortably. Get help,...